Available for TP-Link Archer C7 V2 and V4
The flash tool WILL NOT work for V5, only V2 & V4
1. Download and setup Minim Installer for Your Computer
First, you'll need to download the Minim Installer and install it on your computer. You can find a link to the Minim Installer in the Minim Care Portal under Inventory.
The Minim Installer is available for both Windows and Mac operating systems. Be sure to download and install the proper application for your computer.
2. Flash the router with the Minim Installer
After you’ve downloaded and installed the Minim Installer, you can go ahead and flash a router. Plug the router’s power cable in, then connect the router to the internet by connecting an ethernet cable between the WAN port of the Archer C7 and an ethernet port on the modem, to give the router internet access. Connect one of the LAN ports on the router to your computer with another ethernet cable, and wait a bit until the router gives your computer an IP address. Once you’re connected, open up the Minim Installer and select *Start* at the main menu after signing in.
3. Activate the router
After you've successfully installed the Minim agent, you will see it in your Inventory.
To start using Minim on the subscriber's network, select to Enable the router in the Inventory list.